Samsung SP-R4212 - LNA (Low Noise Amplifier)

83
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button. Press the ▲ or ▼ button to select
“Channel”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “LNA”, then press the
ENTER button.
3
Press the ▲ or ▼ button to select “On” or “Off”, then
press the ENTER button.
4
Press the MENU button to exit.
Notes
• LNA functions only when antenna is set to AIR and the settings will be stored separately in
each channel. (See “Selecting the Antenna” on page 76.)
• If the picture is noisy with the LNA set to On, select Off.
• The LNA setting must be made for each channel.
Channel TV
Move Enter Return
…
More
Channel List
Signal Strength
LNA : Off
…
More
Channel List
Signal Strength
LNA : Off
Channel TV
Move Enter Return
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
†
More
Channel TV
Move Enter Return
Off
On
Off
On
BN68-00835D-00Eng_(064~083) 4/15/05 11:33 AM Page 83