Samsung SP0802N - How to Check if HDD Is Working

PALO
6
SAMSUNG HARD DISK DRIVE
4. How to check if HDD is working.
※
How to check if your HDD is working
※
1) Insert LED to LED Hole of PCBA shown above and check HDD alive.
①
Insert LED to LDD1,LDD2 of PCBA LED Hole.
②
Insert LED as follows: LDD1
⇒
+ , LDD2
⇒―
③
Insert "
" part within LED to the
―
(LDD2) direction and " " part to the +(LDD1) direction.
2)YoucancheckifHDDisworkingbyseeingtheLEDonPCcase.
Controller
DRAM
Combo IC
Spindle Motor
LED Hole
LED
Flash ROM