P/T Setting
①Pan/Tilt Limit
②Area Setting
③Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
⑦Auto Track1
⑧Auto Track2
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
19. Prop. P/T
▶
Main Menu/P/T Setting/Prop. P&T
This commands the camera to change the Pan and Tilt speed
automatically according to the current zoom power. Moving
the joystick clockwise (Tele) slows down and counterclockwise
(Wide) accelerates the Pan and Tilt speed, allowing detailed
adjustments.
Turning this “Off” executes the function the optical 1x zoom
speed regardless of how high a the zoom power is.
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
P/T Setting
①Pan/Tilt Limit
②Area Setting
③Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
⑦Auto Track1
⑧Auto Track2
➡
20. Digital Flip
▶
Main Menu/P/T Setting/Digital Flip
Digital Flip is useful to monitor a moving object or a person
passing directly under the camera.
When an object or a person passes directly under the camera,
the camera tilt monitor follows the object or person over 100
degrees to the other side of the tilt area without panning. The
screen inversion occurs at 100 degrees or higher and is
digitally adjusted.
Functional Description Functional Description
To Next Page
Loading...
Need help?
General
