Samsung SPD-3700T User Manual

SPEED DOME CAMERA User’s Manual
28
SPEED DOME CAMERA User’s Manual
29
Installing Your Camera
Installing Your Camera
•
Camera Wiring Diagram 2
1. Attaching Template and Installing STB-370PC
Attach the enclosed template to the ceiling, then drill a hole in the ceiling according to the
diameter marked on the template. Drop the camera cables down from the ceiling through
the hole. Next, install the exposed bracket STB-370PC to the ceiling as shown in the
picture.Before installing the exposed bracket, open the hinged door at the bottom of the
bracket as shown in the picture. Hold the knob on the hinged door to open.
2. Wiring Terminal Cables
Connect the cables to the terminal block on the
hinged door. For the location of the wiring pins,
please refer to the “Camera Wiring Diagram”
on Page 14. Once the wiring is successful, close
the hinged door.
Knob
Template
•Donotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
Notes
On-Ceiling Mount Type Installation Example

Samsung SPD-3700T Specifications

General

Brand	Samsung
Model	SPD-3700T
Category	Camera Accessories
Language	English