141 Settings
• Connect - An alert tone is sounded when you are initially
connected.
• Sig. Fade Tone- An alert tone is sounded when your phone
partially loses signal due to network conditions or leaving
network coverage area.
• Roam - An alert tone is sounded when your phone enters a
roaming area.
• Power On - An alert tone is sounded when your phone is
powered On.
• Power Off - An alert tone is sounded when your phone is
powered Off.
To enable or disable alert sounds:
1. Press , followed by for Settings.
2. Press for Sounds.
3. Press for Alerts.
4. Press:
• for Minute Beep
• for Service
• for Connect
• for Sig. Fade Tone
• for Roam
• for Power On
• for Power Off
5. Select On or Off using the navigation key and press to
save and exit.
A900 BMC.book Page 141 Monday, May 22, 2006 9:50 AM
To Next Page
Loading...
