19 Phone Basics
are displayed. Press the left softkey to Save the new number in
your Contacts. (See “Saving a Phone Number” below for more
information.)
Note: The End-of-Call options are not displayed for calls identified as
Unknown ID or Restricted number.
Saving a Phone Number
Your phone can store up to 500 phone numbers in its Contacts list.
Each Contacts entry can store up to a total of five phone numbers,
and each entry’s name can contain up to 20 characters. (For more
information, see "Adding a New Contact" on page 127.)
To save a number from standby mode:
1. Enter a phone number.
2. Press the right softkey for Options.
3. Press for Save.
4. Select New Entry and press .
Note: Step 4 does not appear when your Contacts list is empty.
5. Select the Type using the navigation key and press
6. Enter the name using the keypad and press .
7. Press the left softkey for Done.
After you have saved the number, the new Contacts entry is
displayed.
• Mobile • Home • Work
• Pager • Others
A900 BMC.book Page 19 Monday, May 22, 2006 9:50 AM
To Next Page
Loading...
