Samsung SPHM520 - Page 56

40 Section 2B. Settings
To change the keypad setting:
1. While in standby mode, select Main Menu > Settings
> Display > Keypad Light.
2. Select Slider Up, 30 seconds, 15 seconds, 8 seconds,
or
Off.
PowerSave Mode
This feature helps extend the life of the battery by
controlling the display, keypad, and volume settings.
1. While in standby mode, select Main Menu > Settings
> Display > PowerSave Mode.
2. Select On or Off.
Changing the Dialing Font
Adjust the display appearance when dialing phone
numbers.
To change the dialing font color:
1. While in standby mode, select Main Menu > Settings
> Display > Dialing Font > Color.
2. Select Basic, Rainbow, Monochrome, or Hyphenate.
3. Press Done (left softkey) to apply the change.
To change the dialing font size:
1. While in standby mode, select Main Menu > Settings
> Display > Dialing Font > Size.
2. Select Large, Normal, or Small.
Note
Long backlight settings affect the battery’s talk and
standby times.
Note
Rainbow makes each digit of a number a different
color;
Monochrome assigns a single color to an
entire number.
M520_Sprint.book Page 40 Thursday, September 18, 2008 12:34 PM