5.Identifying and dissembling the parts
－7－
SR-21/24 NME(WME)
To remove shelves in the
freezing compartment
●First remove the icemaking
molds. Tilt the shell up at front,
then lift it up pull it out of the tracks.
To remove shelves in the
chilled compartment
●Lift up the cover, push the cover to
the right until the mounting hook
disengages, then disengage the
other mounting hook and pull out the
cover.
●Pull the shelf forward until it stops.
Then lift it up and pull it out.
To remove door bins
●While pushing the bin to the left, left
it up to disengage.
To remove shelves in the
refrigerating compartment
●Hold the shelf by the front and pull
it forward of the rack.
To remove storage
drawers and covers
●Lift up to remove the cover. Pull
the drawer out then lifting it up.
To Next Page
Loading...
