Samsung SV-3000 User Manual

17
Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the VCR OUTPUT
CH option is selected.
5 Select the required output channel by pressing the ➛ or ❿ buttons.
6 On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
Setting the VCR Output Channel
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷ ➛❿ OK END:MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❷ ❿ END:MENU
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷ ➛❿ OK END:MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❷ ❿ END:MENU
You must choose the sound mode (G or K) according to the TV set
connected to your VCR.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The
INSTALLATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the TV SYSTEM
option is selected.
5 Press the ❿ button to select G or K.
6 On completion, press MENU twice to exit the menu.
Selecting the RF OUT Sound Mode
16
Displaying/Hiding On-Screen Information
Choosing Your Language
You can change the language in which information is displayed on
the screen.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
LANGUAGE SET option.
3 Press the OK button to select this option.
Result
: The LANGUAGE SET menu is displayed.
4 Select the required language by pressing the  or ❷ buttons.
5 Press OK to store the language selected.
6 Press MENU to exit the menu.
Result
: From now on, all the on-screen information will be
displayed in the language selected.
USER SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
OPTIONS
❷ ➛❿ OK END:MENU
Your VCR displays most information both on the VCR and the
television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU which cannot be
hidden).
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the OK button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding  or ❷ buttons, until the OSD option is
selected.
5 To... Press ➛ or ❿ , until...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6 On completion, press MENU twice to exit the menu.
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
❷ ❿ END:MENU
OK
REC MENU
SPEED DUB TV/VCR TIMER
2
2
2
1
3
2
GB
GB
01993A SV-3000_HACO-GB2 6/19/03 10:12 AM Page 16

Samsung SV-3000 Specifications

General

Brand	Samsung
Model	SV-3000
Category	VCR
Language	English