Samsung SyncMaster 210T - Adjusting Your LCD Monitor: Features; Automatic Setting Save; Source and PIP Functions

English 9
English
FrançaisDeutschEspañolPortuguese Italiano
Automatic Save
Whenever you open the OSD and allow an adjustment window to remain active for about 3
seconds without pressing other buttons, the monitor automatically saves any adjustment you
have made. These changes are saved into a user area in the monitor.
The monitor can save adjustments for up to 4 user modes. It has 13 for 210T (15 for 240T )
factory preset or preload modes, one for each signal frequency as listed in table 7 on page 25.
If you have made no adjustments, the on screen display disappears and the monitor does not
save anything.
7
n Moves the selector right or left on the OSD.
n Increases or decreases the Brightness.
n Increases or decreases the values of the selected
function.
Function
Description
SOURCE n Use this button to change a video source
n Video sources are changed in the following order:
D-sub DVI RCA S-VIDEO
n Video: RCA/S-Video PC: D-Sub/DVI (Analog/Digital)
PIP n Use this button to see both PC and Video the same time with either
PC or Video is in a small window superimposed on PC or Video.
*When PBP, Picture-By-Picture, is activated, PIP button performs
“Picture Swap.”
No. Name Description
Adjusting Your LCD Monitor
MENUEXITAUTOPIPSOURCE
PC
VIDEO
PC
Video
MENUEXITAUTOPIPSOURCE
PC
VIDEO
PC
(D-sub/DVI)
Video
RCA/S-Video
MENUEXITAUTOPIPSOURCE
PC
VIDEO
Video
(RCA/S-Video)
PC
D-sub/DVI
MENUEXITAUTOPIPSOURCE
PC
VIDEO
Video
RCA
S-Video
PC
D-sub
DVI
MENUEXITAUTOPIPSOURCE
PC
VIDEO
Video
RCA
S-Video
PC
D-sub
DVI
240T(E)body2.fm Page 9 Monday, October 23, 2000 6:32 PM