Connecting to a Computer | Connecting to a VCR | Connecting to a DVD Player | Connecting to a Camcorder
Connecting to a DTV Set Top Box | Connecting Speakers | Connecting to an Audio System
1. Connecting to a Computer
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Trun on the power switch.
2. There are 3 ways to connect the signal cable to your monitor.
Choose one of the following:
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, RGB port on the back of your monitor.
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI(HDCP) port on the back of your monitor.
2-3. Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports on the back of
your Monitor and the 15 pin D-sub Port on the computer.
To Next Page
Loading...
