Samsung SyncMaster 320P - Page 35

The Input source of MagicNet works only for the MagicNet model.
7. PIP Control - PIP Size
1. Click on PIP from the main icons and the PIP Control screen appears.
Click Select All or use the Check Box to select a display to control.
The Info Grid shows some basic information necessary for the PIP Size Control.
1) PIP Size
- Shows the current PIP Size of the display in use.
2) OFF
- Turns off the PIP of the selected display.
3) Large
- Turns on the PIP of the selected display and changes the size to Large.
4) Small
- Turns on the PIP of the selected display and changes the size to Small.
5) Double1
- Turns on the PIP of the selected display and changes the size to Double 1.
6) Double2
- Turns on the PIP of the selected display and changes the size to Double 2.
7) Double3 (Picture By Picture)
- Turns on the PIP of the selected display and changes the size to Double 3.
The PIP Size can be controlled by turning on the monitor power.
The Input source of MagicNet works only for the MagicNet model.
7. PIP Control - PIP Source
1. Click on PIP from the main icons and the PIP Control screen appears.