Samsung SyncMaster 320P - Page 37

The info Grid shows some basic information necessary for the Settings Control.
When each function is selected, the set value of the selected function is displayed in the slide.
When Select All is selected, the default value (50) is returned.
Changing a value in this screen automatically changes the mode to "CUSTOM."
1) Picture
- Available only for AV, S-Video, Component, DVI(HDCP).
2) Contrast
-
A
d
j
usts the Contrast of the selected displa
y
.
3) Brightness
- Adjusts the Brightness of the selected display.
4) Sharpness
-
A
d
j
usts the Sharpness of the selected displa
y
.
5) Color
-
A
d
j
usts the Color of the selected displa
y
.
6) Tint
- Adjusts the Tint of the selected display.
7) Color Tone
-
A
d
j
usts the Color Tone of the selected displa
y
.
This feature is only available for displays where the power is ON and if no selection is made, the
factory default is displayed.
The Input source of MagicNet works only for the MagicNet model.
8. Settings Control - Picture PC
1. Click on Settings from the main icons and the Settings Control screen appears.