Less than 5 W
Dimensions (WxHxD)/ Weight
780 X 482 X 107 mm / 30.1 X 19.0 X 4.6 inch / 16.1 kg
780 X 530 X 223 mm / 30.1 X 20.9 X 8.8 inch (With Stand) - Option
982 X 482 X 107 mm / 38.7 X 19.0 X 4.2 inch (With Speaker) - Option
982 X 530 X 223 mm / 38.7 X 20.9 X 8.8 inch (With Speaker, With Stand) - Option
VESA Mounting Interface
200 mm x 200 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature: 50°F ~ 104°F (10°C ~ 40°C)
Humidity: 10 % ~ 80 %, non-condensing
Storage Temperature: -4°F ~113°F (-20°C ~ 45°C)
Humidity: 5 % ~ 95 %, non-condensing
Audio Characteristics
Audio Input 1 RCA Jack Red(R) White(L), 0.5 Vrms (-9 dB)
Audio Input 2 RCA Jack Red(R) White(L), 0.5 Vrms (-9 dB)
PC Audio Input 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB)
Frequency RF: 80 Hz ~ 15 kHz (at -3 dB)
Response A/V: 80 Hz ~ 20 kHz (at -3 dB)
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor
installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Ac ceptable
TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one
millionth) and above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to
be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it
without any problems.
z For example, the number of TFT LCD sub pixels contained in this product are 3,133,440.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in
all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor
automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn
your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system
o
To Next Page
Loading...
