This stand is designed for adjusting the screen angle. The company is not responsible for any problem
caused when using this stand• Under no circumstances use the product as a stand for placing something on
IBS_H R9 the Stand KT (sod salparately
1) A 'Covar-Protecto¢ is used to protect the hole at the bottom of the LCD Display, where the stand is
inserted Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KiT
(sold separately) and cover the hole using the 'Cover-HoW when attaching the wail mount kit.
2) Ensure that the parts are inserted in the right direction and in the right place (M4 x L15)
3) insert the stand into the hole at the bottom of the LCD Display
4) Insert the screw into the hole indicated and tighten it (M4 x L15)
Con#eeti_g the LCD Display
Using a Power cord with Earth
Inthe event of failure, the earth lead may cause electric shock Make sure to wire the earth lead in
correctly, before connect!rig the AC power• When un-widng the earth lead, make sure to disconnect
the AC power in advance
[] Note
AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected
to the LCD Display For detailed information on connecting AV input devices, refer to the User Controls
under Adjusf, ng Your LCD Display.
Co_r_act ng _o a ComlpLIter
To Next Page
Loading...
