1)
2)
Connect the power cord for your LCD Display to the power port on the back of the LCD Display
Trun on the power switch.
There are 3 ways to connect the D-sub to your LCD Display.
Choose one of the following:
2-1) Using the D-sub (Analog) connector on the video card.
Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the 15 pin D-
sub Port on the computer.
2-2) Using the DV[ (Digital) connector on the video card.
Connect the DVl Cable to the DVI(HDCP) port on the back of your LCD Display and the DVI port
on the computer
2-3) Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNCtCOMPONENT IN o R, G, B, H, V ports on the back of your
LCD Display and the 15 pin D_sub Port on the computer
3) Connect the audio cable for your LCD Display to the audio port on the back of your computer
[] Note
• Turn on both your computer and the LCD Display
[] Note
The DVl cable or BNC cable is optional.
Contact a local Samsung Electronics Service Center to buy optional items
To Next Page
Loading...
