1) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIOoR] on the LCD Display and
the AUDIO OUT jacks on the DVD player•
2) Connect a Component cable between the BNCtCOMPONENT IN - PR,Y, PB port on the LCD Display and
the PR, Y, PBjacks on the DVD player
17f Note
. Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD
Display or on the remote control
. Then, start the DVD Player with a DVD disc inserted.
[] Note
. A component came is optional
For an explanation of Component video, consult your DVD manual
: Co_'_eot ng to a Cameor#er
1) Locate the A/V output jacks on the camcorder They ere usually found on the side or back of the
camcorder.
Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN
[LoAUDIO°R] on the LCD Display.
2) Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the
LCD Display.
[] Note
Select AV for the Camcorder connection using the SOU RCE button on the front of the LCD Display or on
the remote control.
Then, start the Camcorders with a tape inserted
[] Note
To Next Page
Loading...
