Theaudio-videocablesshownhereareusuallyincludedwithaCamcorder.
(Ifnot,checkyourlocalelectronicsstore.)
Ifyourcamcorderisstereo,youneedtoconnectasetoftwocables
Co_'_n_:,_xt n{,I to a _i)TV Set 'Top Box
[] Note
, The connections for a typical Set Top Box are shown below.
1) Connect a Component cable between the BNC t COMPONENT IN - PR, Y, P8 port on the LCD Display and
the PR, Y, PBjacks on the Set Top Box.
2) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and
the AUDIO OUT jacks on the Set Top Box
[] Note
* Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front d the
LCD Display or on the remote control
[] Note
* For an explanation of Component video, see your Set Top Box owner's manual
Co_n_:,ot ng Speaker's
[_ Note
• Fasten the SET and the speaker using the screws
• Mount the speaker set without the speaker stand.
To Next Page
Loading...
