3. Sharpness
Adjusts the Sharpness of the PIP window on the screen.
4. Color
Adjusts the Color of the PIP window on the screen.
Note
PIP input only operates in AV, HDMI, or Component mode.
5. Tint
Adds a natural tone to the PIP window.
Note
PIP input only operates in AV, HDMI, or Component mode.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
1. Off
2. On
Note
This function is disabled when PIP or Energy Saving is On.
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
Note
Not available when Dynamic Contrast is set to On.
Adjusting the LCD Display
To Next Page
Loading...
