Attention dealers and users. This device is registered for EMC requirements for industrial use
(Class A) and can be used in areas other than general households.
When the network box is not connected
Class B(Information Communication equipment for residential use)
This device is registered for EMC requirements for home use (Class B). It can be used in all
areas.(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This LCD Display has a built-in power management system called PowerSaver. This system
saves energy by switching your LCD Display to low-power mode when it has not been used
for a certain amount of time. The LCD Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver
400DX-3
State Normal Opera-
tion
Power saving
mode
Power off Power off
(Power Swich)
Power Indicator On (Green) Blinking Amber Off
Power Con-
sumption
(With Network
Box)
200 Watts
(682 BTU/h)
5 Watts
(17.05 BTU/h)
5 Watts
(17.05 BTU/h)
0 Watts
(0 BTU/h)
Power Con-
sumption
(Without Net-
work Box)
170 Watts
(579.7 BTU/h)
2 Watts
(6.28 BTU/h)
1 Watts
(3.41 BTU/h)
0 Watts
(0 BTU/h)
460DX-3
State Normal Opera-
tion
Power saving
mode
Power off Power off
(Power Swich)
Power Indicator On (Green) Blinking Amber Off
Power Con-
sumption
(With Network
Box)
240 Watts
(818.4 BTU/h)
5 Watts
(17.05 BTU/h)
5 Watts
(17.05 BTU/h)
0 Watts
(0 BTU/h)
Power Con-
sumption
(Without Net-
work Box)
210 Watts
(716.1 BTU/h)
2 Watts
(6.28 BTU/h)
1 Watts
(3.41 BTU/h)
0 Watts
(0 BTU/h)
Specifications
To Next Page
Loading...
