• Off
• On
No Signal OSD
• Off
• On
MDC OSD
• Off
• On
Software Upgrade
Performs a software upgrade.
1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the
BMP image file converted from an SW code. The image below will appear on the screen
of the product.
2. While a BMP image onto which the software code has been converted is displayed on
the screen, select Software Upgrade.
Note
When there are two or more BMP images, they are displayed on the screen using a
slideshow.
Adjusting the LCD Display
Downloaded From TV-Manual.com Manuals
To Next Page
Loading...
