English - 2
Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Connecting Your Monitor
1
Turn off your computer and unplug
the power cord.
2
Signal cable
Connect the end of the signal cable to
your computer’s video port (Video
board, video card, or graphics card).
If you are using a Macintosh
computer, connect the cable to a
Macintosh adapter, and set the pins
on your adapter (Adapter not
included). A PC-compatible computer
does not need an adapter.
3
Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
4
Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
5
Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
6
Install monitor driver
•
Insert the provided diskette into the
A drive.
•
Double click the “install.exe” file.
Manual
Stand
Monitor
Power Cord
Warranty card
(Not available in all locations)
Driver
Installation Diskette
EXIT
EXIT
MENUMENU
MENU
3
4
2
Your New Monitor
E-2.fm Page 2 Friday, April 28, 2000 4:40 PM
To Next Page
Loading...
