• Connect a set of audio cables between the AUX L, R jacks on the
AUDIO SYSTEM
and the
AUDIO OUT
[L-AUDIO-R]
on LCD Display.
Connecting to a Wired Remote Control
Note
• You can control your monitor by allowing it to receive the remote control signals of other devices through
the REMOTE OUT terminal.
• You can control a device by allowing it to receive remote control signals from other devices through the
REMOTE IN terminal.
Note
• Restrictions: Available only if other devices support the wired remote control I/O terminals.
Connecting HDMI
Note
• Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI
cable.
Note
• You cannot connect a PC to the HDMI IN terminal.
Connecting Using a DVI to HDMI Cable
To Next Page
Loading...
