Samsung SyncMaster 720TD - Page 41

MagicColor
{
Especially, MagicZone is appropriate to using the moving picture.
{
Auto Detect
: If you run the Movie in some players, MagicZone will
automatically get the play screen highlighted (it will be supported in players
of Gom, Adrenalin, KCP, Window Media, and Power DVD etc., )Some other
players also can be highlighted but could have some problems.
{
Tusk menu
HUE
Adjust the tint of the color.
Saturation
Adjusts the color saturation.
Brightness
Adjusts the Brightness.
Sharpness
Adjusts the difference between the lightest and darkest areas
of the display.
Zone Off
Turn off the zone that you have captured.
Reset
Returns to the the default setting that vendor has set.
z
Depending on the monitor models
Color Control, Sharpness,
Contrast, Color Tone, Brightness
will not be adjustable in
MagicColor
mode of
Full
and
Intelligent
.
z
MagicTune™ will be disappear if you excute MagicZone, and
closing the MagicZone after adjusting, will show the MagicTune™
again.
(System Tray is Unhecked)
MagicTune™ will be disappear if you excute MagicZone, and
closing the MagicZone after adjusting. will not show MagicTune™
again.
(System Tray is Checked)
z
MagicColor mode will be different according to monitor models.
MagicZone mode will show if the monitor supports the function.
Gamma
Gamma correction changes the luminance of the colors with intermediate luminance.
Gamma mode will be different according to monitor models. Some
monitor will only support Three modes( Mode1, Mode2, Mode3)
Ima
g
e Tab Definition
A
djusts the Fine , Coarse and Position values.
Image Setup
z
Fine : Removes noise such as horizontal stripes.
If the noise persists even after Fine tuning, repeat it after adjusting the frequency
(clock speed).
z Coarse : Removes noise such as vertical stripes.
Coarse adjustment may move the screen image area.
You may relocate it to the center using the Horizontal Control menu.
z
Auto Setup : Auto adjustment allows the monitor to self-adjust to the incoming
video signal. The values of fine, coarse and position are adjusted automatically.
Position
Adjusts the screen location horizontally and vertically.
Sharpness
Changes the clearance of image.