On-Screen Display
The menu will automatically turn off if no adjustments are made for a
certain time period. You can set the amount of time the menu will wait
before it turns off.
1 Push the Menu( ) button.
2 Push the button or button until the Menu screen is displayed.
Push the button or button to select Menu Duration.
3 Push the Menu( ) button to open the Menu Duration selection
screen.
4 Use the or buttons to select 3, 7, 10, 20 or 50 seconds. 10 sec-
onds is the default value.
Follow these steps to change the language used in the menu. You can
choose one of ten languages. English, German,French, Italian, Portu-
guese, Spanish, Swedish, Russian, Polish ,or Magyar. (Some OSD
languages may not appear in some areas.) The language chosen af-
fects only the language of the OSD. It has no effect on
any software running on the computer.
1 Push the Menu( ) button.
2 Push the button or button until the Menu screen is displayed.
Push the button or button to select Languages.
3 Push the Menu( ) button to open the Languages selection screen.
4 Use the button or button to select the language you would like to
use.
Menu Duration
Languages
Menu How to adjust
To Next Page
Loading...
