50
Screen Setup
4
4 Screen Setup
4.6 Fine
Fine-adjust the screen to obtain a vivid picture.
Only available in Analog mode.
4.6.1 Adjusting Fine
1 Press [ ] on the product.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to Fine and press [ ] on the product. The following screen will appear.
4 Adjust the Fine using the [ ] button.
4.7 Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
z It is best to set Response Time to Normal or Faster when you are not viewing a movie.
z The functions available on the monitor may vary depending on the model. Refer to the actual
product.
4.7.1 Configuring Response Time
1 Press [ ] on the product.
2 Press [ ] to move to Picture and press [ ] on the product.
To Next Page
Loading...
