5-3 Troubleshooting
5-3 FAQ
FAQ! PLEASE TRY THE FOLLOWING!
How can I change the frequency of the video signal? You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the com-
puter or the graphics card.)
How can I change the resolution? Windows XP : Change the resolution by selecting Control
Panel
→ Appearance and Themes → Display → Settings.
Windows Vista : Change the resolution by selecting “Control
Panel”→“Appearance and Personalization”→“Personaliza-
tion”→“Resolution”.
Windows 7 : Change the resolution by selecting “Control
Panel”→“Personalization”→“Display”→“Adjust resolution”.
(For more information, refer to the User Manual of the com-
puter or the graphics card.)
How can I use the power saving function?
Windows XP : Configure it by selecting Control Panel
→
Appearance and Themes
→ Display → Screen Saver Set-
ting or configure it in the BIOS Setup of the computer.
Windows Vista : Change settings by selecting “Control Panel”
→ “Appearance and Personalization”→“Personalization”→
“Screen Saver”. You can also use the BIOS SETUP menu on
the PC.
Windows 7 : Change settings by selecting “Control Panel”→
“Personalization”→“Screen Saver”. You can also use the
BIOS SETUP menu on the PC.
(For more information, refer to the User Manual of the com-
puter or the graphics card.)
To Next Page
Loading...
