Samsung SyncMaster P2370MS - Remote Control

Using the Product 3-3
Anynet+ (HDMI-CEC)
Connecting Anynet+ Devices
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding <Anynet+> device using an HDMI
cable.
2. Connect the [HDMI IN] jack of the home theatre and the HDMI OUT jack of the corresponding <Anynet+> device using an
HDMI cable.
Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
[DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
You can connect an <Anynet+> device using the HDMI 1.3 cable. Some HDMI cables may not support <Anynet+>
functions.
<Anynet+> works when the AV device supporting <Anynet+> is in the Standby or On status.
<Anynet+> supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
MENU DESCRIPTION
Source List Use to select <PC> or an external input source connected to the Monitor.Use to select the screen of
your choice.
You can use the [SOURCE] button on the remote control.
• <PC> - <DVI> - <AV> - <Component> - <HDMI>
Edit Name Name the input device connected to the input jacks to make your input source selection easier.
• <VCR> - <DVD> - <Cable STB> - <Satellite STB> - <PVR STB> - <AV Receiver> - <Game> -
<Camcorder>- <PC> - <DVI PC> - <DVI> - <TV> - <IPTV> - <Blu-Ray> - <HD DVD> - <DMA>
Anynet+ (HDMI-CEC) What is <Anynet+>?
<Anynet+> is a function that enables you to control all connected Samsung devices that support
<Anynet+> with your Samsung TV‘s remote. The <Anynet+ > system can be used only with Samsung
devices that have the <Anynet+> feature. To be sure your Samsung device has this feature, check if
there is an <Anynet+> logo on it.