27
3D
2
2 3D
Configuring the 3D Mode
1 Press [ ] on the product.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to 3D and press [ ] on the product.
4 Press [ ] to move to 3D Mode and press [ ] on the product. The following screen will appear.
z Off: Disable the 3D Mode function.
z 2D 3D: Converts a normal video to 3D video.
z Frame Sequential: Display the left and right images alternately in each frame.
z Top-Bottom: Display the top and bottom images overlapping each other to allow you to
experience the 3D effect.
z Side-By-Side: Display the left and right images overlapping each other to allow you
toexperience the 3D effect.
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
2.1.2 Depth
Determines the three-dimensional effect of the 3D video.
Configuring Depth
1 Press [ ] on the product.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to 3D and press [ ] on the product.
Off
2D→3D
Frame Sequential
Top-Bottom
Side-by-Side
3D
3D Mode :
Depth
L/R Change
3D→2D
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
