35
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
Connection Using an DP Cable (Digital Type)
1 Connect the DP cable to the DP port on the back of the product and the DP port on the PC.
2 Connect the DC power adapter to the product and a power socket, and turn on the power switch
on the PC.
Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to
hear audio.
3.3.2 Driver Installation
z You can set the optimum resolution and frequency for this product by installing the corresponding
drivers for this product.
z An installation driver is contained on the CD supplied with the product.
z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and
download the file.
1 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Click "Windows Driver".
3 Follow the instructions given on the screen to proceed with installation.
4 Select your product model from the list of models.
5 Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
