28
3D
2
2 3D
4 Press [ ] to move to Depth and press [ ] on the product. The following screen will appear.
5 Adjust the Depth using the [ ] button.
6 The selected option will be applied.
2.1.3 L/R Change
Switch the left image to the right image, and vice versa.
Configuring the L/R Change
1 Press [ ] on the product.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to 3D and press [ ] on the product.
4 Press [ ] to move to L/R Change and press [ ] on the product. The following screen will
appear.
z L/R Image
z R/L Image
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
2.1.4 3D 2D
Activates 2D screen mode.
This function is turned off when 3D is 2D 3D or Off.
Volver Intro
3D
Modo 3D
: 3D→2D
:
: Imagen I/D
Volver
Cambio I/D
3D→2D
5
Adjust
Return EnterMove
L/R Image
R/L Image
3D
3D Mode : Frame Sequential
Depth
L/R Change :
3D→2D :
→
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
