22
Preparations
1
1 Preparations
Icons Description
Configure Customized Key and press [ ]. The following options will
be enabled.
ECO - MAGIC - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Volume(VOL) can be adjusted if a cable is connected to the [DP IN] or
[AUDIO IN] port.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Analog/DisplayPort/Digital). If you power on
the product or change the input source by pressing the [ ] button,
a message that shows the changed input source will appear at the top
left corner of the screen.
Press the [ ] button to automatically adjust the screen settings.
z Available only in Analog mode.
z Changing the resolution in Display Properties will activate the
Auto Adjustment function.
Turn the screen on or off.
(Power lamp)
The power indicator will be lit when the product is operating normally.
z Refer to "9.2 PowerSaver" for details about the power-saving
function.
z To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
To Next Page
Loading...
