45
Screen Setup
3
3 Screen Setup
3.5 Coarse
Vertical noise (stripes) on the screen will be removed.
The screen may be moved after changing the frequency (Coarse). If this is the case, move the screen to
the center using the H-Position adjustment menu.
Only available in Analog mode.
3.5.1 Adjusting Coarse
1 Press [ ] on the product.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Coarse and press [ ] on the product. The following screen will appear.
4 Adjust the Coarse using the [ ] button.
To Next Page
Loading...
