46
Screen Setup
3
3 Screen Setup
3.6 Fine
Horizontal noise (stripes) on the screen will be removed.
If the noise is not completely removed after adjusting the Fine value, adjust Coarse and try Fine
adjustment again.
Only available in Analog mode.
3.6.1 Adjusting Coarse
1 Press [ ] on the product.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Fine and press [ ] on the product. The following screen will appear.
4 Adjust the Fine using the [ ] button.
To Next Page
Loading...
