28
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
1 Press [ ] to move to the language you want and press [ ].
2 To hide the information message, press [ ].
z If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
z The optimum resolution can also be selected in Control Panel on your PC.
The optimal resolution for this monitor is as follows:
**** x **** **Hz
Follow the above settings to set the resolution.
English
AUTO
EXIT
To Next Page
Loading...
