55
Setup and Reset
6
6 Setup and Reset
6.9 Auto Source
You can activate Auto Source.
6.9.1 Configuring Auto Source
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Auto Source and press [ ] on the product. The following screen will
appear.
z Auto: The input source is automatically recognized.
z Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
To Next Page
Loading...
