Samsung SyncMaster T22A350 - Connections; Plug & Play (Initial Setup)

15
English
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER P button. Plug & Play is available only when the Input Source is set to TV.
✎ Before turning on the TV, make sure the antenna cable is connected.
✎ To return to the previous step, press the Red button.
1
Selecting a language
Press the ▲ or ▼ button, then press the ENTER E button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo
or Home Use
Press the ◄ or ► button, then press the ENTER E button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
y Store Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home Use when you
watch at home.
3
Selecting an area
Press the ENTER E button. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER E button to confirm your choice.
4
Setting the
Clock
Set the ENTER E button.
Select the Day, Month, Year, Hour, or Minute by pressing the ◄ or ► button.
Set the Day, Month, Year, Hour, or Minute by pressing the ▲ or ▼ button.
You can also set the Day, Month, Year, Hour and Minute by pressing the number buttons
on the remote control.
5
Selecting a channel The channel search will start automatically.
For more information, refer to Channel → Auto Tuning.
✎ Press the ENTER E button at any time to interrupt the memorisation process.
6
Enjoy your TV.
Press the ENTER E button.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want
to change the PIN number, use the Change PIN function. You should do Plug & Play (MENU → System) again at home
although you did in shop.
ANT OUT
Connections