Samsung TA350 - System Settings

29
English
Basic Features
¦ Selecting the Sound Mode
When you set to Dual fg , the current
sound mode is displayed on the screen.
Audio
Type
Dual f - g
Default
A2
Stereo
Mono Mono
Automatic
change
Stereo
Stereo ↔ Mono
Dual
Dual
f ↔ Dual g Dual f
NICAM
Stereo
Mono Mono
Automatic
change
Stereo
Mono ↔ Stereo
Dual
Mono ↔ Dual
f
 Dual g 
Dual
f
✎ If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
✎ Only activated in stereo sound signal.
✎ Only available when the input Source is set to TV.
System Menu
¦ Setting the Time
O MENU m → System → ENTER E
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O The current time will appear every time you press
the INFO button.
✎ If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
x
Auto: Set the current time automatically using the
time from a digital channel.
✎ The antenna must be connected in order to set
the time automatically.
x
Manual: Set the current time manually.
✎ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
✎ Available only when Clock Mode is set to
Manual.
✎ You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Time Zone (depending on the country): Select your
time zone.
✎ This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer
■ Sleep Timer
t
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎ To cancel Sleep Timer, select Off.
Setting the On / Off Timer
■ On Timer 1 / On Timer 2 / On Timer 3: Three different
on timer settings can be made. You must set the clock
first.
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at you
convenience. If you select Manual, you can set up the
day you want to activate the timer.
✎ The c mark indicates the day is selected.
On Time: Set the hour and minute.
Volume: Set the desired volume level.
DUALf-g
TV
2000 00
ATV 1
On Timer 1
Setup
Once
Source
VolumeOn Time
Antenna Channel
Sun Mon Tue Wed Thu Fri Sat
U Adjust L Move E Enter R Return