◀ ▶
Issues Solutions and Explanations
When changing
channels, the picture
freezes or is distorted
or delayed.
●
If connected with a cable box, please try to reset the
cable box. Reconnect the AC cord and wait until the
cable box reboots. It may take up to 20 minutes.
●
Set the output resolution of the cable box to 1080i or
720p.
Sound Quality First of all, please perform the Sound Test to confirm
that your TV audio is properly operating. (go to MENU -
Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the
source or signal.
There is no sound or
the sound is too low
at maximum volume.
●
Please check the volume of the device (Cable/Sat Box,
DVD, Blu-ray etc) connected to your TV.
English
To Next Page
Loading...
