◀ ▶
❑ Switching between Anynet+ Devices
1. Press the TOOLS button, then select Anynet+ (HDMI-CEC).
2.
Anynet+ devices connected to the TV are listed in Device List.
N
If you cannot find a device you want, press the
A
button to refresh the list.
3. Select a device and press the ENTER
E
button. You can switch to the selected
device.
N
Only when you set Anynet+ (HDMI-CEC) to On in the System menu, the
Device List menu appears.
●
Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●
If you have selected external input mode by pressing the SOURCE
button, you cannot use the Anynet+ function. Make sure to switch to an
Anynet+ device by using the Device List.
English
To Next Page
Loading...
