◀ ▶
❑ Setting Up Anynet+
O
MENU
m
→
System
→
Anynet+ (HDMI-CEC)
→
ENTER
E
■
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-
CEC) must be set to On.
N
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically
when the TV is turned off.
N
If Auto Turn Off is set to Yes, running external devices will turn off at the
same time as the TV powers off.
N
May not be enabled depending on the device.
English
To Next Page
Loading...
