◀ ▶
Issues Solutions and Explanations
TV is tilted to the right
or left side.
●
Remove the stand base from the TV and reassemble it.
There are difficulties
assembling the stand
base.
●
Make sure the TV is placed on a flat surface. If you
can not remove the screws from the TV, please use a
magnetized screw driver.
The Channel menu is
grey out (unavailable).
●
The Channel menu is only available when the TV source
is selected.
Your settings are lost
after 30 minutes or
every time the TV is
turned off.
●
If the TV is in the Store Demo mode, it will reset audio
and picture settings every 30 minutes. Change the
settings from Store Demo mode to Home Use mode
in the Plug & Play (Initial setup) procedure. Press the
SOURCE button to select TV mode, and go to MENU
→
System
→
Plug & Play (Initial setup)
→
ENTER
E
.
English
To Next Page
Loading...
