◀ ▶
When Antenna Source is set to Air or Cable:
When selecting Cable
→
Digital & Analogue or Digital: Provide a value to
scan for cable channels.
–
Search Mode (Full / Network / Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
N
If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
–
Network (Auto / Manual): Selects the Network ID setting mode among
Auto or Manual.
–
Network ID: When Network is Manual, you can set up Network ID using
the numeric buttons.
English
To Next Page
Loading...
