◀ ▶
●
Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
N
NOTE
●
After selecting Screen Fit in HDMI (1080i / 1080p) or
Component (1080i / 1080p) mode, you may need to centre the
picture
LCD 420 does not support AV, Component mode
:
1. Press the
▲
or
▼
button to select Position.
2. Press the ENTER
E
button.
3. Press the
▲
,
▼
,
◄
or
►
button to move the picture.
●
Depending on the input source, the picture size options may vary.
●
If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
English
To Next Page
Loading...
