◀ ▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to
set up automatically” procedure.
2. Select the IP Settings on network
connection screen.
3. Set IP Mode to Manual.
4. Press the
▼
button to go to the first entry
field.
IP Settings
R
Return
OK
IP Mode
Manual
IP Address
0 . 0 . 0 . 0
Subnet Mask
0 . 0 . 0 . 0
Gateway
0 . 0 . 0 . 0
DNS Mode Manual
DNS Server
0 . 0 . 0 . 0
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons to enter numbers and the arrow buttons to move from
one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
English
To Next Page
Loading...
