2-11
2. Product specications
2-3-2. Setting the Network Connection
Connection Methods: You can setup the wireless network connection in four ways:
Auto Setup (Using the Auto Network Search function)•
Manual Setup•
WPS(PBC)•
One Foot Connection•
Network Settings
Wired Network Setup01.
1. Go to the Network Settings screen.
(MENUm
→
Network
→
Network Settings
→
ENTERE)
Select 2. Wired, and then press ENTERE.
The network connection screen appears and veries the network 3.
connection. When the connection has been veried, the "Internet
connected successfully." message appears.
Wireless (General) Network Setup02.
1. Go to the Network Settings screen.
(MENUm
→
Network
→
Network Settings
→
ENTERE)
Select 2. Wireless (General), and then press ENTERE.
The Network function searches for available wireless networks. 3.
When done, it displays a list of the available networks.
WPS(PBC) Network Setup03.
If your router has a PBC (WPS) button, follow these steps:
1. Go to the Network Settings screen.
(MENUm
→
Network
→
Network Settings
→
ENTERE)
Select 2. WPS(PBC), and then press ENTERE, then press
ENTERE again.
Press the WPS(PBC) button on your router within 2 minutes. Your 3.
TV automatically acquires all the network setting values it needs
and connects to your network.
4.
The network connection screen appears, and network set up is done.
One Foot Connection Network Setup04.
The One Foot connection make you easy to connect samsung TV and
samsung wireless router by placing samsung wireless router within
1foot(25cm) from samsung TV. If your wireless router does not support One
Foot Connection, you must connect using one of the other methods.
Turn on the power of wireless router and TV.1.
Go to the2. Network Settings screen.
(MENUm
→
Network
→
Network Settings
→
ENTERE)
Select 3. One Foot Connection,, and then press ENTERE, then
press ENTERE again.
The network connection screen appears, and network set up is done.4.
To Next Page
Loading...
