Samsung UN32D5500RF - Service Adjustment; White Balance - Adjustment; White Balance - Calibration

4-37
4. Troubleshooting
4-3. White Balance - Calibration
4-3-1. White Balance -Calibration
Factory
ADC / WB
AV Calibration
Comp Calibration
PC Calibration
HDMI Calibration
4-3-2. Service Adjustment
- You must perform Calibration in the Lattice Pattern before adjusting the White Balance.
 Color Calibration
Adjust spec.
Source : HDMI1.
Setting Mode : 1280*720@60Hz2.
Pattern : Pattern #24 (Chess Pattern)3.
Use Equipment : CA210 & Master MSPG925 Generator4.
Use other equipment only after comparing The result with that of The Master equipment.
Input mode Calibration Pattern
CVBS IN (Model_#1) Perform in NTSC B&W Pattern #24 Lattice
Component IN (Model_#6) Perform in 720p B&W Pattern #24 Lattice
PC Analog IN (Model_#21) Perform in VESA XGA (1024x768) B&W Pattern #24 Lattice
HDMI IN Perform in 720p B&W Pattern #24 Lattice
4-3-3. White Balance - Adjustment
Factory (Low light) (High light)
ADC / WB - White Balance
Sub Bright
R offset
G offset
B offset
Sub Contrast
R gain
G gain
B gain