EasyManua.ls Logo

Samsung UN40C6300SF - By Online; By USB; Software Upgrade; White Balance - Adjustment

Samsung UN40C6300SF
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-58
4. Troubleshooting
4-4-3 White Balance - Adjustment
ADC/WB -> White Ballance
(low light) (hight light)
Sub Bright
R offset
G offset
B offset
Sub Contrast
R gain
G gain
B gain
(W/B adjustment Condition refer next page)
4-5. Software Upgrade
Samsung may offer upgrades for the TV’s rmware in the future.
These upgrades can be performed via the TV
when it is connected to the Internet, or by downloading the new
rmware from samsung.com to a USB memory device.
- Alternative Software (Backup) shows the previous version
that will be replaced.
- Software is represented as ‘Year/Month/Day_Version’.
The more recent the date, the newer the software version
Installing the latest version is recommended.
4-5-1. By USB
Insert a USB drive containing the rmware upgrade downloaded
from samsung.com into the TV. Please be careful to not
disconnect the power or remove the USB drive while upgrades
are being applied. The TV will turn off and turn on automatically
after completing the rmware upgrade. Please check the rmware
version after the upgrades are complete (the new version will
have a higher number than the older version).
When software is upgraded, video and audio settings you have
made will return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset them
after the upgrade.
4-5-2. By Online
Upgrades the software using the Internet.
- First, congure your network. For detailed procedures on using the Network Setting,
refer to the ‘Setting the Network’ instructions.
- If the internet connection doesn’t operate properly, connection can be broken, please retry downloading.
If the problem still happens, download by USB and upgrade.
4-5-3. Alternative Software (Backup)
If there is an issue with the new rmware and it is affecting operation, you can change the software to the previous
version.
- If software was changed, existing software is displayed.
- You can change current software to alternative software by ‘Alternative Software’.

Table of Contents

Other manuals for Samsung UN40C6300SF

Related product manuals