Samsung UN40C6300SF - Entering Factory Mode; Factory Mode Adjustments

4-32
4. Troubleshooting
4-3. Factory Mode Adjustments
4-3-1 Entering Factory Mode
To enter ‘Service Mode’ Press the remote-control keys in this sequence :
- If you do not have Factory remote- control
Power OFF
MUTE 1 8 2
Power ON
- If you have factory remote-control
INFO FACTORY
* If you don’t have Factory remote control, can’t control some menu.
Option
Control
SVC
Expert
ADC/WB
Advance
T-VALAUSC-xxxx
T-VALAUSS-xxxx
EDID SUCCESS
CALIB : AV O COMP O PC O HMDI O
Option : xxxx xxxx xxx
DTP-SP-VAL-xxxx
RFS : 45-1G-46
READING : 1015
Type : 40A1U1F0C
Model : LN40C650
MAC SUCCESS
Factory Data Ver : 88
DTP-AP-COMP-347
DTP-HIGH-0342-1
TLIB US3 1G 2008-11-18-01
DTP-BP-0350
Date of purchase : mm/dd/yyyy
- T-VALAUSC-xxxx and T-VALAUSS-xxxx is rmware ver.
Buttons operations withn Service Mode. 1.
Menu Full Menu Display/Move to Parent Menu
Direction Keys /
Item Selection by Moving the Cursor
Direction Keys /
Data Increase / Decrease for the Selected Item
Source
Cycles through the active input source that are connected to the unit
* HOW To enter the Advanced menu (Picture)
- Cursor move to ‘Advanced’
- Push the ‘0’ button 4 times.
- You can see the ‘Picture’ menu.