Samsung UN40J5200AF - Entering Factory Mode

4-3-2. Entering Factory Mode
o enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF Info Menu Mute Power ON
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus. •
Option
Control
Debug
SVC
ADC/WB
Advanced
T-N14MJAKUC-xxxx.x
T-N14MJAUSS-xxxx
BT Version: ****
E-Manual : NMISDBH-xxxx
EDID SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : ********,****,5200,****
RFS:"NT14M xxxx" K/1 20xx-xx-xx
KERNEL:xxx.xxxx,/Onboot: xxxx
DTP-DTVTD-xxxx
TCON Version:----
Model: UA32J5300
Wired MAC ----
Wireless MAC ----
WIFI: ATH6KL(xxxx_xxxx)
CO Nf/ W/ M/ D/ H2 PO AO/ S/ N/ SC/
Factory Data Ver:xxx / EERC Version: xxx
SmartControl: ****
DTP-BP-HAL-xxxx
DTP-BP-MW-xxxx
DTP-BP-APP-xxxx-xx-Hijack
POP-PNG-xx-xxxx
Date of purchase:-/-/----
4-5
4. Troubleshooting